This product has been produced to identify visible features and terrain for emergency management. This product is also used on a whole of government basis as a visible record of the landscape at a given point in time, allowing for comparative analysis to be carried out over different epochs.
Land-Topography,Land Cover, Photography and Imagery, Photography and Imagery-Aerial,Photography and Imagery-Remote-Sensing
location, imageryBaseMapsEarthCover
West Bounding Longitude: 146.8177518770001
East Bounding Longitude: 146.9152146
South Bounding Latitude: -29.995647307999945
North Bounding Latitude: -29.931306681999956
EPSG Code: 7855
Horizontal Datum: Geocentric Datum of Australia (GDA) 2020
MGA Zone: 55
Data Capture Start Date:25 March 2021
Data Capture End Date: 25 March 2021
| Capture | |
|---|---|
| Acquisition Start Date: | 14 April 2021 |
| Acquisition End Date: | 14 April 2021 |
| Flying Height (AGL): | 5128ft |
| Number of Project Flight Lines: | 7 |
| Product | |
|---|---|
| Horizontal Datum: | Geocentric Datum of Australia (GDA) 2020 |
| Projection: | Map Grid of Australia (MGA), Zone 55 |
| Description of Aerotriangulation Process Used: | N/A |
| Spatial Accuracy Horizontal: | N/A |
| Resolution: | 15cm |
| Surface Model: | Semi-Global Match DTM |
| Calibration certification (Manufacturer/Cert. Company): | Issued by Leica Geosystems |
| Limitations of the Data: | Accuracy specifications (95% CI) meet ICSM Guidelines for Digital Elevation data |
| Distribution Format: | ECW (Enhanced Compressed Wavelet) |
| Product Type: | Standard Colour Orthorectified Mosaic3 Band False Orthorectified Mosaic |
| Bands: | R,G,BNIR,R,G |
| Compression Rate: | 5 :1 for ECW |
| Bits per pixel: | 8 |
| Processing/Derivation Lineage: | As per Spatial Services Product Specification |
| Sensor | |
|---|---|
| Device Name: | Leica ADS80 |
| Camera Head: | SH82 |
| Type: | Flood |
| Dynamic Range: | 12 bit |
| Resolution A/D Converter: | 16 bit |
| Data Channel: | 16 bit |
| Focal length: | 62.7mm |
| Data Compression Factor: | ~2.5x and ~3.6x |
| Radiometric Resolution of compressed data: | 10 bit and 12 bit |
| Data Normalization modes: | Non-linear |
| Recording Interval Per Line (sensor per line): | >= 1msec |
| Spectral Range: | Panchromatic, R, G, B, NIR |
| Panchromatic: | 465-495 λ (nm) |
| Blue: | 435-495 λ (nm) |
| Green: | 530-580 λ (nm) |
| Red: | 610-660 λ (nm) |
| Near Infra-Red: | 840-900 λ (nm) |
| Field of View: | 64 degrees across track ( swath angle) |
| f-number: | 4 |
| Registration Accuracy: | 1 µm |
| Lens Design: | Maintains position and width of all filter edges over the whole Field of View. Thermic and pressure compensation for high accuracy |
| Flightlines |
|---|
| Data linage |
|---|
Flight line information can be provided as a shape file using the internal project id m3803. The Leica ADS80 is equipped with a SH82 sensor head with a field of view (swath angle) of 64° and multiple linear CCD’s of 12 000 pixels each, enabling the capture of 5 spectral bands of information. These bands are; panchromatic having spectral wavelength between 465-495 λ (nm), blue (B) having a spectral wavelength between 435-495 λ (nm), green (G) having a spectral wavelength between 530-580 λ (nm), red (R) having a spectral wavelength between 610-660 λ (nm), and near-infrared (NIR) having a spectral wavelength between 840-900 λ (nm).This product has been created using a documented process which is consistent with well accepted digital image processing techniques ( Leica GeoSystems ADS80 User Manual 2010).
This process includes the following steps:
|
Licence: Access and Licenses are managed by Spatial Services, a unit of Department Customer Service. Spatial Services creates and manages intellectual property (IP) for the Crown in right of New South Wales. Acquisition of this data is subject to the customer entering into an appropriate Creative Commons license agreement. To the extent that Creative Commons licensing applies, all data and other material produced by Spatial Services constitutes Crown copyright. Spatial Services has applied the Creative Commons Attribution 4.0 Australia Licence. Spatial Services asserts the right to be attributed as author of the original material in the following manner:© Department Customer Service. Additional terms for the use of Spatial Services material include that any derived products which are created will be required to clearly mark the date that any extractions from the Spatial Services Spatial Database occurred. All Intellectual Property (IP) which is owned by Spatial Services should only be loaded on any external cloud platforms if Spatial Services' Intellectual Property (IP) remains unchanged, maintained and preserved.
Unless stated in the licence, the Data as described by this metadata statement, and copyright in the Data, always remains the property of the Crown in right of New South Wales as managed by Spatial Services.
Copyright: Unless stated in the licence, the Data as described by this metadata statement, and copyright in the Data, always remains the property of the Crown in right of New South Wales as managed by Spatial Services.
Intellectual Property: Spatial Services creates and manages intellectual property (IP) for this data for the Crown in right of NSW. Spatial Services has the right to licence the use of this IP for an appropriate fee. Shared IP rights may reside in the data and in this circumstance specific terms and conditions will be included in the data licence.
Other Restrictions: Unless otherwise stated in the licence;The Data is licensed for the Licensee’s ordinary business use only, excluding any commercial exploitation. Hard copies may be produced from the Data for the Licensee’s own use, but not for resale, either in combination with other data or not, without the prior written consent of the Licensor.This licence is granted on the express undertaking that the Data or any part of the Data will not be copied, lent, resold, altered, decompiled, disassembled or otherwise disposed of without the written permission of the Licensor.The Data may not be copied (except to create backup copies for the Licensee’s exclusive use), or manipulated in any way with the intention of reconstituting them so that they can be used in any software package, other than that of the Licensee. The copyright notices appearing on the Data may not be removed or obscured, and must be displayed on any backup copies created by the Licensee.
Organisation Name: Spatial Services, a unit of Department of Customer Service
Organisation Address: 346 Panorama Ave, Bathurst, NSW 2795
Email: ss-sds@customerservice.nsw.gov.au
Website: https://six.nsw.gov.au/
www.spatial.nsw.gov.au
Phone: 02 6332 8287